Stay One Step High With New HP OfficeJet Pro 8720
Despite its large size, the HP OfficeJet Pro 8720 is a valuable addition to any desk. With its durable materials and clever design choices, it stands out as one of the most comprehensive printers available for home use. The HP OfficeJet Pro 8720 Printers are All-in-One Inkjet Printers from HP that offer a range of features including printing, scanning, copying, and faxing, all in one unit, making it a time and resource saver. The printer is also Instant Ink Ready, ensuring USA users always have a fresh cartridge on hand. The unit can produce double-sided prints at a speed of 20 ppm for black and 17 ppm for color, and can create borderless images up to 8.5 x 11" or A4 sizes. Setting up this printer is incredibly easy and automatic, making it one of the most user-friendly all-in-one printers on the market.
Get through this setup manual to get complete guidance for your HP Officejet Pro 8720 Printer Setup and start printing across various devices.
Step by Step Guide For HP OfficeJet Pro 8720
Step 1: HP OfficeJet Pro 8720 Printer Unboxing
- Carefully remove the printer from its box.
- Remove all protective materials from the printer.
- Open the printer and remove any protection from the glass surface and touch panel.
- Proceed with the setup guide.
Step 2: HP OfficeJet Pro 8720 Printer Power Cord Connection
- Find the power input port on the back of your printer. It's usually near the bottom.
- Take one end of the power cord and insert it into the power input port on your printer.
- Plug the other end of the power cord into a power outlet or a surge protector.
- Press the power button on your printer to turn it on. The printer will initialize and be ready for use.
Step 3: HP OfficeJet Pro 8720 Printer Ink Cartridge Installation
- Wait until the printer is idle after turning it on.
- Pull the access door for the ink cartridges in your direction to open it.
- Before continuing, wait until the cartridge carrier stops moving.
- Remove the new ink cartridge's packaging before carefully peeling off the plastic tape.
- Slide the ink cartridge into the proper slot while holding it by its sides. Make sure the color of the slot and the cartridge match.
- Until it snaps into place, push the cartridge into the slot.
- For each additional cartridge that requires replacement, follow the same procedure.
- Wait for the printer to print an alignment sheet and align the cartridges.
Step 4: HP OfficeJet Pro 8720 Paper Tray Alignment
- Insert certain plain white paper in the feeder tray in a stack.
- In the control panel of the printer, click the "home button".
- Tap the Setup (gear-shaped) icon on the printer's control panel.
- To perform printer maintenance, click "Printer Maintenance."
- The "Align Printer" option.
- To finish the alignment process, adhere to the on-screen directions.
- Print a test page after the alignment process is finished to make sure the alignment is accurate.
Step 5: HP OfficeJet Pro 8720 Driver Download and Installation Using “123.HP.com/Setup/OfficejetPro 8720”
- Go to the official HP website 123.hp.com/setup.
- Navigate to the "Software and Drivers" section.
- Click the search button after typing "HP OfficeJet Pro 8720" into the search box.
- From the drop-down menu, choose your computer's operating system.
- Click the "Download" button next to the desired driver and software package.
- Wait for the download to finish and locate the downloaded file in the Downloads folder.
- To start the installation process, click double on file
- Follow the instructions provided on the screen to complete the software installation for the HP OfficeJet Pro 8720.
Note :
Installation Of Drivers Through CD/DVD
Follow the below mentioned steps for installation of HP Officejet Pro 8720 Driver through CD/DVD.
- Ensure that your printer is turned on and connected to your computer before inserting the DVD.
- Check the installation CD for any scratches or other obstructions, and if found, do not use it to avoid damaging your computer.
- You will need to insert the CD into your computer's CD drive.
- The installation process will begin automatically upon CD insertion.
- Follow the printer's on-screen instructions after saving the file to the C drive.
Let’s Bring Something Advance To The Table
HP OfficeJet Pro 8720 Wireless Setup
- Click on the Wi-Fi symbol located on the printer's control panel.
- Click the button next to the printer settings to proceed.
- The Wireless Setup Wizard will start searching for nearby networks. Click OK to continue.
- Check if your network's name is listed. If not, manually enter the name and press OK.
- When prompted, enter the WPA key for your network and select OK.
- Your printer is now successfully connected to the network.
HP OfficeJet Pro 8720 USB Setup
- Turn on your computer and printer.
- Plug the USB cable into the printer and computer's USB port.
- Wait for your computer to detect the printer. If prompted, install the printer driver software.
- Go to your computer's "Settings" or "Control Panel" and select "Printers."
- Choose "Local Printer" from the "Add a printer" menu.
- Choose the HP Officejet Pro 8720 printer from the list of available printers.
- Click "Next" and follow the on-screen prompts to finish the installation process.
123.hp.com Oj Pro 8720 Setup for Windows
- First, connect it with a power cord and turn the printer on.
- Connect your printer to your computer using a USB cable or connect both devices to the same Wi-Fi network.
- Go to the Windows search bar and type "Devices and Printers".
- The search results will show "Devices and Printers".
- You will be able to add a printer by clicking the "Add a printer" tab.
- Choose your HP OfficeJet Pro 8720 from the list of available printers.
- Click "Next" and wait while your computer installs the necessary drivers.
- Once the installation is complete, print a test page to ensure that your printer is properly configured.
123.hp.com Oj Pro 8720 Setup for Mac
- Turn on your printer.
- Connect your printer to your Mac using a USB cord or connect both devices to the same Wi-Fi network.
- Go to the Apple menu and select "System Preferences".
- Click on "Printers & Scanners".
- Click the "+" button to add a new printer.
- Choose your HP OfficeJet Pro 8720 from the list of available printers.
- Click "Add" and wait while your Mac installs the necessary drivers.
- Once the installation is complete, print a test page to ensure that your printer is properly configured.
