HP Printer Not Printing Black Try These Proven Fixes

HP printer users are used to a common scenario. They try printing something but find out that their HP Printer Not Printing Black. There are many potential causes of black printing issues with HP printers. Because they are so minor, many of them go unnoticed. As a result, they continue to encounter this issue. The good news is that printer not printing black problem has a wide range of solutions. You can make your HP printing gear more effective by using those techniques. They are easy to put into practice. This article contains all possible solutions.

Why Isn’t Black Printing on Your HP Printer?

For a variety of reasons, your printer may not print black enough. If you’ve been wondering why your HP printer won’t print in black ink, here are a few explanations.

• A printhead problem exists.
• incorrect cartridges.
• Issues with the paper settings.
• The printer’s driver is defective.
• Low or no ink is present.

How to Fix an HP Printer That Won’t Print Black

There are numerous approaches to examine and address the hp printer black ink not working issue. The troubleshooting guidance is easy to understand. Simply focus on following the detailed instructions.

Carry out simple troubleshooting

If you’re wondering why your HP printer won’t print in black, start by carrying out some basic troubleshooting. The numerous actions you need to take are outlined below.

• Deactivate your HP printer. Unplug it from the power outlet.
• After that, disconnect the USB cables. Wait for a while.
• Reconnect and plug in your device after that.
• Then turn on the printer.
• Print a test sheet or a good diagnostic report.
• The screen of your HP printer contains this choice.
• If you’re still having difficulties finding it, look through the user manual for your printer.
• Check the ink levels in your printer. Find out how much ink each cartridge can hold. When possible, switch to genuine HP cartridges from aftermarket ones. Use of HP’s toner products is advised. Regarding the dependability or quality of refilled cartridges, the manufacturer makes no assurances. To find out if the cartridges you are using are genuine, go to the HP anti-counterfeit website.

Make the printhead clean.

If your HP Printer Not Printing Black, another action to take is to clean the printhead. An essential part of the printing process is the printhead. To make it presentable, it prints words on paper. Follow these directions to clean the printhead.

• Go to the “Start” button and type “Control Panel” into the search bar. After that, click ‘Drivers and Printers’.
• On the following page, you may find the icon for your printing setup. Right-click it and select “Properties.”
• Choose “Hardware” from the menu that appears in the window.
• Select “Clean Ink” in the new window that appears after that.
• To clean the printhead, adhere to the directions displayed on your screen. When it’s done, print a test page.

Check the ink cartridge.

If your cartridge is running low on ink, you can experience an HP Printer Not Printing Black issue. Check the points mentioned below.

• Replace the low or empty ink cartridge.
• Make sure that the ink cartridges are inserted correctly into the appropriate slot and are firmly snapped in place.
• If a new cartridge has been inserted, make sure the tape covering the vent has been removed.
• Check to see if the cartridge’s vents are blocked. If they are blocked, use a pin to gently clean it.
• Try using a different ink cartridge to see whether your printing machine can identify cartridges. If the previous cartridge was the one that helped your printer work properly, try installing it once more.
• Your new black cartridge is the root of the problem if the printer can print using the old cartridge. Therefore, you should replace it.

Align the cartridges.

Make sure you have paper in your printer and printer is turned on. If your hp printer black ink not working, Follow the instructions mentioned below to align the cartridges.

• In the Control Panel’s lower left corner, click the button adjacent to the setup icon.
• By pressing the right arrow button, choose “Tools” then. Now, press “OK.”
• Press “OK” after using the right arrow button to select “Align Printer.” The printer will print an alignment sheet.
• Lift the lid of the printer.
• The front right corner of the scanner glass should have the alignment page there. Ensure that the printed side is facing downward. You can check the instructions adjacent to the scanner glass if you need help to load the alignment page.
• Close the printer’s lid. The alignment is finished when you click “OK.”

Check out the paper setting.

If the aforementioned fixes don’t work, it’s likely that your problem is with your printer software. In this case, altering the paper settings will allow you to resolve the issue. Follow these recommendations.

• Change the printer driver’s settings. Select “Glossy photo paper.” As a result, your printer can start printing in black.
• Keep in mind that only printers that employ two black ink cartridges may achieve this. One of two black inks will normally be used by the printer, depending on the kind of paper you select. Glossy paper works well with dye-based ink, and matte paper is excellent for pigment-based ink. When you go from one kind of paper to another, one of the black ink cartridges will probably begin to function.

Last Words

When your HP printer won’t print in black, this advice must be helpful. If you apply the suggestions provided in this blog, you won’t have this problem. However, if none of these solutions work and your printer still won’t print in black, it’s time to seek professional help. Do not hesitate to get in touch with knowledgeable HP customer support. All of your printer issues will eventually be quickly resolved.