Convert Your HP Printer’s Wireless Connection To USB

You can completely set up your HP printer with the aid of simple guidance from 123.hp.com/setup. Because, after purchasing the printer, users must set it up and obtain its drivers in order to get HD prints from the HP printer. If you have been using an HP wireless printer that is directly connected to your computer for a long time and are experiencing problems, you can change the connection to a USB connection. You’re probably wondering how to convert an HP printer wireless connection to USB So, in this blog, you will find a straightforward step-by-step guide that will assist you in making the connection.

HP Printer’s wireless connection to USB is a simple an easy task. You can easily convert a wireless link to a USB connection using a USB cable. When you are ready to link your HP printer to the network after setting it up, you can choose between wireless setup and USB setup. In a wireless setup, you will have more than one choice, whereas, in a USB setup, you will only need to connect an Ethernet cable to a router and the computer’s CPU.

Hence, to know how- let us move ahead to learn the steps.

However, before you proceed with the setting, you must have the following items:

• Make sure that your wireless network is functioning properly and that your wireless router is working correctly.
• Note down the SSID (Service Set Identifier) of the wireless network router that you are using.
• If you are using password linked to your wireless network, you will need to obtain the WEP key or WPA password.
• Once you are done with all of these things, you can connect your HP printer to the router using a USB cable.

Steps To Change From Wireless Connection To USB

In this part, you will learn about the necessary steps to switch the Printer wireless connection to USB. As a result, take the following significant steps:

• Disconnect the printer from the computer.
• Open the Control Panel on your computer.
• Select the Printer and Faxes option.
• Click on the “wireless all-in-one printer” and choose the “Delete” button.
• Connect the USB cable to your printer and computer ports.
• Turn on your printer.
• Install the “Brother AIO Home Center software”.
• Click on Start and select All Programs on your computer.
• Go to Brother and select Brother Printer Network Setup Utility.
• Choose your USB model number for the printer and click Next.
• The printer driver will be installed automatically when you connect the USB cable.
• Click on the Done button when you see the Printer driver installation complete message.
• The USB-connected printer will now be added to the Printer and Faxes section and will be available for printing from your computer programs.

Note: The above-mentioned simple process can be easily tried to connect the printer to your computer and network. The above instructions will assist you in quickly connecting a wireless device to a USB port. If you want to change your USB link back to a wireless connection, remove the USB connection and rebuild the wireless connection.

We hope that the information provided above will be extremely useful in converting your HP Printer from wireless connection to USB. You can use the same USB that came with your printer. If you’ve misplaced it or your USB cable isn’t functioning, replace it. However, if you encounter any other problems with your printer or if you are unable to link the printer to your computer via USB, you can contact HP printer experts for assistance.